Today, we are going to share some points that make you more understand about how to choose the correct indoor LED display.
Generally speaking, there are only two types of LED screens, Indoor and outdoor. So, when you make the solution for the indoor LED displays, it is kind of different from the outdoor type.
Here are five details you need to pay attention:
View angles are deciding how many audiences can view the LED screen clearly. Wider view angle, more people can view it. So it can make your cost and advertising maximization. The view angle is caused by encapsulation of the LEDs, therefore, if you have enough budget, choose the better encapsulation of the LED.
Someone will notice if the brightness is too high, our eyes to get damaged, BUT if too low, the screen will not clear enough. So the standard brightness for indoor is 800-1200 nits.
Bad flatness will absolutely make the effect of the LED screen worse, and the standard flatness is keeping ±1 mm. So, when we are making the solution, the die-casting aluminum cabinet will be the best for indoor LED screens.
4. The LEDs
There are two types of LEDs for indoor, white SMD LEDs and black SMD LEDs, the black LEDs we are using mostly for the pixel pitch which is lower than 5mm, and we have to choose the black LEDs for indoor LED screen, this is a very important point.
5. Dead pixels
The LED screens are made by so many small pixel LEDs, so, less dead pixels, better effect. It is also according to the technology and original material, when you asking the price, make sure the original material is what you need.