Previous
Next
The K-Palm Thermometer can measure a person’s temperature guickly, efficiently and touchelss by hovering his hand over the device for just a few seconds.
The Temperature Measurement Error Range is only ±0.2°C and the time needed for a single measurement is less than 1 second.
Videos
Without the K-Palm Thermometer
- Close contact between two people, easy to get infected
- High Labor Cost
- Low Pass Efficiently
- The temperature needs Manual Observation
- Data Output: NO
With the K-Palm
Thermometer
- Remote Suprevisionto avoid the infection
- Reduce Labor Cost
- High Pass Efficiently
- The alarm will go on, if the temperature is abnormal.
- Data Output: YES
Important Facts
- The product consist of 2 parts:
- Temperature Measurement Device Module.
- Display Screen.
- The detection destance is about 2-8cm, without touching the equipment.
- The temperature measurement speed is less than 0.5 sec.
- After each measurement, the buzzer will sound a prompt sound.
- The temperature measurement error range is ±0.2°C.
- The default alarm of the device is 37.7°C, if the temperature is higher will power on the buzzer alarm for 5 sec.
About the Product
The K-Palm Thermometer has 2 different Sensors.
A laser distance sensor and an infrared temperature sensor. The temperature is detected through the cross temperature measurement algorithm of temperature and distance.
The K-Palm Thermometer has a double rotating bracket.
The installation mode can be wall mounted, placed on the table, or fixed to a channel gate and security door which is convenient and flexible, applicable to various scenarios.
Product Parameters
| PRODUCT SPECIFICATION | |||
|---|---|---|---|
| Temperature Measurement Mode | Single Point Temperature Measurement | ||
| Range Detection | Laser | ||
| Temperature Measurement Range | 0.5 - 0.8 sec. | ||
| Maximum Detection Angle | 5° | ||
| Discrimination of Temperature Measurement | 0.02°C | ||
| Accuracy | ±0.2°C | ||
| Temperature Measurement Distance | 2 - 8 cm | ||
| Buzzer | Built in Buzzer | ||
| Measurable Temperature Range | -10°C ~ 100°c | ||
| Optimum Working Enviroment Temperature | 15°C ~ 40°C | ||
| Device Interface | Supports RS485 | ||
| Power Supply Voltage | DC12V | ||
| Working Current | 0.2A | ||
| Power Adapter | AC220V to DC12V | ||
| Equipment Dimensions | 325 x 180 x 60 mm | ||
| Packing Dimensions (Single Set) | 375 x 215 x 85 mm | ||
| Weight (Single Set) | 1.8 Kg | ||
| PRODUCT SPECIFICATION | |||
|---|---|---|---|
| Temperature Measurement Mode | Single Point Temperature Measurement | ||
| Range Detection | Laser | ||
| Temperature Measurement Range | 0.5 - 0.8 sec. | ||
| Maximum Detection Angle | 5° | ||
| Discrimination of Temperature Measurement | 0.02°C | ||
| Accuracy | ±0.2°C | ||
| Temperature Measurement Distance | 2 - 8 cm | ||
| Buzzer | Built in Buzzer | ||
| Measurable Temperature Range | -10°C ~ 100°c | ||
| Optimum Working Enviroment Temperature | 15°C ~ 40°C | ||
| Device Interface | Supports RS485 | ||
| Power Supply Voltage | DC12V | ||
| Working Current | 0.2A | ||
| Power Adapter | AC220V to DC12V | ||
| Equipment Dimensions | 325 x 180 x 60 mm | ||
| Packing Dimensions (Single Set) | 375 x 215 x 85 mm | ||
| Weight (Single Set) | 1.8 Kg | ||